“______________" 6 inch (150mm) petty blade culinary knife.
Super Steel: The blade is made from molybdenum vanadium [stainless] steel, which is a mid-grade stainless steel hardened to HRC 57. Nothing fancy, but gets the job done, won’t rust, and easy to sharpen. You won't have to baby this knife. The edge angle is sharpened to 15 degrees and stropped for a razor sharp edge. Full flat grind (tapers from spine to cutting edge). The blade is 6” (150 mm) long, 1.122” (29.5 mm) tall, & 0.073” (1.85 mm) thick at the spine with a distal taper (gets thinner as it goes to the tip). Total length of the knife is 10.7” (272 mm).
The blade is made from VG10 core hardened to 60 HRC. Multiple layers of stainless are forged on both sides of the blade that protect the core and result in the damascus layer pattern. VG10 is a high hardness stainless that doesn’t require the maintenance or care of a carbon steel. VG10 blades should be sharpened with a water stone, synthetic stone, or diamond. Do not use a honing steel on this blade. The edge angle is sharpened to 17 degrees and then stropped to a super sharp finish. The blade is 6” (150 mm) long, with a convex surface grind.⠀
You may also like